Plastic Pet/PVC Welder High Frequency Welding Machine for Computer Mouse Packaging

• Cooling Way: Air Cooling
• Style: Handheld
• Frequency Range: High Frequency
• Electric Current: AC
• Work Form: Moving-Coil
• Type: TIG Welder
• Applicable Industries: Garment Shops, Building Material Shops, Manufactur
• Warranty of Core Components: 1 Year
• Core Components: PLC
• Weight: 1500 Kg
• Key Selling Points: Automatic
• Application: Food, Commodity, Medical, Chemical, Machinery & Ha
• Automatic Grade: Semi-Automatic
• Driven Type: Pneumatic
• Voltage: 220V/380V
• Transport Package: Wooden Case
• Specification: 1250*1100*1600mm
• Trademark: kxite
• Origin: China
• HS Code: 8515809090
• Production Capacity: 200 Set/Sets Per Month

Product Description

Product Description

The process of joining two or more thermoplastic films or sheets by heating areas in contact with each other to the temperature at which fusion occurs, usually aided by pressure. When the heat is applied by dies or rotating wheels maintained at a constant temperature, the process is called thermal sealing.

Heat seal card-to-card blister packaging is the combination of a fold-over, or separate front and back blister card and a transparent blister, bonded under heat and pressure. Together, blister and card form a beautiful, highly visible shelf presentation of your product.

Heat sealing of plastic-to-plastic (clamshell, printed blister, separate front and back blister) is done by bonding two parts of plastic together under the influence of heat, either radiant or impulse, and pressure. For successful heat sealing of plastic-to-plastic it is of the utmost importance that the right type of plastic is used for making the blisters. Not all types of plastic are suitable for heat sealing, and depending on the design of the blisters, the tooling design is always a critical factor in getting the packaging process to run smoothly. Another factor to control in producing a high-quality finished product is that the blisters need to be cooled down under pressure in a separate cooling press to keep the flanges perfectly straight.

Heat seal card-to-plastic - this heat seal blister technology consists simply of a single piece of board and a blister, and is therefore very economical to produce. The board is coated with a layer of our proven, environmentally friendly, water-based seal coating. After adding a product, the blister can be bonded directly to one side of the card using heat and pressure. Depending on the market in which they are used, the blisters are typically made of PET or PVC.

Detailed Photos

 

Product Parameters

Model	KXT-10GQC1	KXT--12GQC1	KXT--15GQC1
Installed Power	15KVA	20KVA	25KVA
Power Supply	AC 3X380 V / Customizing
Output Power	10KW	12KW	15KW
Working Frequency	27.12MHZ ±0.6%
Power Tube	E3069	E3130	8T85
Antiflash System	NL5557
PLC Control Panel	Touch Screen HMI & Onboard PLC
Electrode Platen Dimensions	40*500MM	40*700MM	40*1000MM
Weight	800KG	1000KG	1500KG

Packaging & Shipping

Company Profile

Wenzhou Kxite Machinery Technology Co., Ltd. was established in 2010.As a manufacturer of packing machines serving the world, we always put quality innovation first, from R&D design, parts procurement, assembly production, quality inspection and evaluation, sales to after-sales and other systems, to truly meet customer needs
Precise sales, think what you think
By inspecting the global packaging machine production status, comprehensively considering the suggestions of printing and packaging industry veterans, according to the actual needs of different customers, we design and produce a variety of configuration models, allowing customers to choose flexibly.
Excellent R&D management
We have an excellent R&D design team and excellent management talents in the packaging industry. We fully understand the actual needs of the packaging industry, ensuring that every piece of equipment we manufacture can be affirmed by customers and create greater benefits.
After-sale guarantee
Provide customers with comprehensive and timely after-sales service and a sense of service in the end.
 

Blister packing machine	Tube Filling Sealing Machine	labeling machine	cartoning machine
Stationery packing machine	ointment Filling Sealing Machine	sticker labeling machine	Stationery cartoning machine
Pharmaceutical packing machine	cream jellies Filling Sealing Machine	bound bottle labeling machine	Pharmaceutical cartoning machine
Food packing machine	toothpaste Filling Sealing Machine	shrink sleeve labeling machine	Food cartoning machine
Daily necessities packing machine	lotion Filling Sealing Machine	adhesive labeling machine	Daily necessities cartoning machine
Fragile items packing machine	cosmetics Filling Sealing Machine	hotmelt glue labeling machine	Fragile items cartoning machine
Auto parts packing machine	medicine Filling Sealing Machine	bound bottle labeling machine	Auto parts cartoning machine
Tissue paper packing machine	Plastic Tube Filling Sealing Machine	packing box labeling machine	Tissue paper cartoning machine
pen packing machine	aluminum tube Filling Sealing Machine	paper box labeling machine	pen cartoning machine
oral liquid packing machine	kxite packing machine	cosmetics packing machine	oral liquid cartoning machine
toothpaste packing machine	napkin cartoning machine	cosmetics cartoning machine	toothpaste cartoning machine

What is HF welding?
High Frequency (HF) or Radio Frequency (RF) welding is the joining of materials by supplying HF energy in the form of an electromagnetic field (27.12 MHz) and pressure to the material surfaces to be joined. A generator produces the energy. The tool used to supply the energy is called an electrode. The electrical energy causes the molecules within the material to start moving, which generates heat that causes the material to soften and thereby fuse together. No outside heat is applied. It is instead generated within the material. After cooling the welded surface under maintained pressure, the material is fused and a weld has been created. The weld seam can be at least as strong as the surrounding material - or even stronger.
Four important factors that affect the final weld result are pressure, welding effect, welding time and cooling time. These parameters can be adjusted and combined in different ways to achieve the optimal welding result for a specific material.
The material most commonly used with HF welding is PVC (polyvinyl chloride), sometimes called vinyl and PU (Polyurethane). The material can be thick or thin, reinforced or coated. It can also be plain, coloured or patterned.
Kxite Machinery customers manufacture a great variety of end products in these materials, such as truck and boat covers, tarps, tents, structures, pool liners, sunshades, billboards, inflatable products, liquid tanks, film screens, waterbeds, stretch ceilings, valve membranes and oil booms.
Advantages of High Frequency Welding Technology
HF sealing occurs from the inside out by using the material itself as a heat source. The heat is focused at the weld target so that the surrounding material does not have to be super-heated to arrive at a target temperature at the joint.
With HF heat is generated only when the field is energized. Once the generator cycles, the heat is turned off. This allows for greater control over the amount of energy that the material sees over the entire cycle. In addition, HF-generated heat does not radiate off the die like on a heated die. This prevents heat-degredation of the material abutting the weld.
HF tooling is usually run "cold". This means that once the HF is turned off, the material stops being heated, but remains under pressure. In this fashion it is possible to both instantly heat, weld, and cool the material under compression. More control over the weld results in more control over the resulting extrusion, thus increasing the weld strength.
RF welds are "clean" because the only material needed to produce an HF weld is the material itself. There are no adhesives or by-products involved in HF welding.

FAQ

ur service:
1 we can design the machine according to your requirement and we can design the process according to your technology process
2 we manufacture the machine according to GMP standard, all the machine welding will be tested by X ray testing.
3 we will pack the machine by film and then pack it by wooden box, load the machine to container by special engineer
4 engineer will install the machine according to your production room and design, test the machine 
5 we will provide online service if you have any questions, you can send email and call us or send message by skype will give you suggestion 

6 we can supply you parts in the future
Pre-sales issues
How to answer technical guidance?
For some customers who need non-standard equipment, we will communicate with the company's relevant technical personnel according to the customer's specific requirements, taking into account the technical feasibility and production costs, and give customers solutions.
How to recommend products?
We can also provide non-standard equipment production and new product development services according to customer requirements. According to the customer's picture of the paper bag to be produced, the purpose of the product to be purchased, the environment, the purchase volume and other related conditions, we will recommend several cost-effective products for the customer to choose.
How to make a quotation?
Based on our company's research and development costs, production costs and customer purchases, we conduct calculations to determine the price of the product.
Problems in sale
About payment
After signing the contract, 30% of the total payment will be paid in advance, and the factory will accept the payment and pay the full amount of the machine for delivery.
About delivery time
About 90 working days after receiving the deposit (non-standard machine), the factory will re-decide whether to change the delivery date when the order is confirmed. The standard machine is generally within 60 working days after receiving the deposit.
Order tracking
After the customer places an order, our company will send professional personnel to track the order and regularly report the production progress to the customer. Customers can check the order status on the official website (delivery query).
Product testing
During the production process, our company will adopt strict inspection process to ensure product quality. Through internal inspection, we ensure that the components produced by our company meet the technical requirements; through external inspection, we ensure that the components produced by our company are not subject to quality problems; and then pass the whole machine inspection to ensure that the mechanical equipment meets the technical production requirements .
Product packaging
Before the product is shipped, it will be packed in a strict vacuum plus bottom tray (wooden tray or steel tray)
Product Transportation
Products are generally shipped from Ningbo Port, China to the destination port by sea.
After sales question
Shelf life/warranty period of the product
The product warranty period is generally one year, and our company provides lifetime maintenance services. If the machine has quality problems, our company will help the customer to solve it through the following ways: a. Send spare parts to the customer. b. Remotely assist customers in maintenance. c. Notify our agent company to send personnel to the customer's factory for maintenance. d. Our company directly dispatches relevant personnel to the customer's factory for maintenance.
About transportation damage
In the process of product transportation, if product damage occurs, it is determined that our product packaging and reinforcement work is not in place, and our company will bear the corresponding losses.
About machine maintenance
We will contact customers on a regular basis on how to maintain and maintain the machine. For domestic customers, we will have a master to provide on-site service.
Problems during use
If there is any problem in the process of using the product, the customer can directly call or send an email to our after-sales department (24-hour hotline). The personnel of our department will respond immediately and make a decision on the response measures within 24 hours.