F2 Series Medium Web and Large Packaging Enterprises 6 Color High Speed Flexo Flexographic Printing Machine for Paper Cup, Paper Bag

Product Description

F2+ Medium Web Flexo Printing Machine

The F2 series medium web flexo printing features delivers the fastest set-ups and changeovers and shorter web path and fastest make-ready times in the industry. Additional advantages over traditional presses include short web paths, without adjusting pressure after changeover and minimal ink usage requirements resulting in waste savings up to 50% and fast changeover times for increased productivity. The max speed can reach 240m/min.

Specification

SMART OPERATION

² Job save/recall, save necessary data of job setup, make job repeat more easily,no need set and adjust again,improve time efficiency and reduce paper waste

² If you do not follow the procedure, the machine will alarm automatically

² On-line monitoring of the whole machine status, real-time monitoring

² Lack of air pressure, auto alarm

² Each printing section was specified with control panel

² Camera based register-Camera based registration system

² Pre-register

² Remote control system-Long distance diagnosis

² Maintenance reminding,automatic remind maintenance(Weekly/Monthly/Yearly)

Key Configurations

² Power supply and compressed air

ü Power: 380V 3PH 50HZ

ü Compressed air:0.6MPa

ü Compressed air Consumption :2 m3/min

² Environment requirements for workshop

ü Relative humidity: 30 -80% (at 20°C).

ü Temperature: 15°C – 35°C

ü Altitude: Less than 2000 m

ü Ground pad to fix and the thickness of the floor should be no less than 20cm

UNWIND UNIT

WEB GUIDE SYSTEM

² Max unwind diameter 1524mm

² Clamp type without shaft, auto lock of clamp head

² 3' convert to 6' 

² Auto tension control system, air brake system

² Hydraulic roll shaft lift: used to load and unload the paper roll without the forklift. 

² Auto stop when paper broken

² Paper splicing device

² Specified in front of the printing section 

² Equipped with pneumatic paper-holding device to splice the paper

² Inspection: the edge

² Adopts the photoelectric sensor for web guide transmission

² Electronic web guide traction device. If there is any excursion in paper feeding, the system will have a constant and accurate adjustment.

² Adopts closed-loop control system to accurately detect the deviation and correct it.

WEB CLEAN AND ANTI-STATIC UNIT

IN-FEED TENSION CONTROL

² To guarantee the cleanness of substrates

² First remove static, then clean the dust in vacuum and then remove static.

² Vacuum is formed by high pressure fan, with the collaboration of dust removal brush, it is separated by the guide groove to effectively remove the printing material dust

² Use the pressure glue roller to clutch and feed paper and to ensure the tension

² Tension roller is driven by servo motor, the tension is controlled by servo motor to ensure the precision registration

VISUAL REGISTER

Please enter the title here

² The automatic registration adopts the visual registration method independently developed by Donghang.

² Starting from the second color group, each color group is equipped with one camera and one industrial control computer.

² The registration of each color group with the base color can be corrected and adjusted in real time at the location of the color group, which can minimize the registration time and reduce paper waste.

² It is equivalent to installing a small image inspection device for each color group. When performing manual corrections, one can immediately see the correction results without having to wait for the pattern to reach the final inspection point, which significantly saves paper.

² The registration mark only requires a small dot of 1.5mm. It can be placed in the blank area of the pattern or within the shock-absorbing strip, without occupying any extra space. This significantly reduces the waste of paper edges.

² mage inspecting camera can take pictures synchronously for the printing materials

² Preset the inspecting position horizontally and vertically

² It can magnify and observe the image with a fixed position to guarantee the printing quality.

² High-definition resolution camera

² High-definition color image monitor-17" LCD monitor

² One high speed paparazzi flashing light

² Product can be magnified, and the dot can be seen clearly

Technical Specifications

(Custom configurations available upon request.)

Specifications	DHF2 1300	Remark
Max. unwinding diameter	1524mm
Max. rewinding diameter	1524mm
Max. paper width	1320mm
Max. printing width	1300mm
Printing repeatlength	286-1100mm
Register Tolerance	±0.10mm
Plate thickness + tape thickness	1.7mm+0.38mm
Substrate	Paper:60-350gsm	Thickness:0.1mm-0.4mm
Max. designedspeed	200m/min
Max. printing speed	180m/min The speed will be impacted by but not limited to following factors:Character of Substrate,Character of ink and additives, Printing Quality Request,Flexo plate and tape
Drying system	Hot air	IR
Ink	Water based ink/Solvent ink
Layout	Operatorfaces to the machine, unwinderin left hand direction	Left or right according to the workshop layout
Machine color	Kxite standard

Drawings & Dimensions

Detailed CAD drawings and dimensional diagrams are available for download here or upon inquiry. Our engineering team can provide tailored designs to meet specific project requirements.

After Sales Service

THE FOLLOWING CONFIGURATIONS AND SERVICE ARE NOT PROVIDED

n Lifting device for anilox roller and plate cylinder

n Anilox roller washing machine

n Waste gas from drying system exhaust pipe

n Air compressor, gas pipeline connected by air compressor and pneumatic device

n Air compressor, containers, Compressed air treatment equipment and related accessories.

n Power cables and wires input to the machine

n Firefighting equipment

n Any form of land construction

n All kinds of oil

n Thermal insulation and sound insulation

n Solvent volatilization treatment and recovery

n Others not listed

Company Profile

DHFLEXO

Wenzhou Kxite Flexo Printing Machine offers full-size flexo printing machines, machine width range of 330-2500mm, covering the entire flexo printing market. It is widely used in label, film flexible packaging, medical packaging, paper containers, paper boxes, paper bags, gift packaging paper, Carton Printing and other products.

Why Choose Us?

Other Products

OEM/ODM capabilities
Competitive pricing & bulk discounts
Fast shipping & customs clearance support
packing printing solutions

flexo printing machine
paper cup printing machine
paper containers printing machine
paper box flexo printing machine
gift packing box printing machine

FAQ

Q: What’s the lead time for orders?
A: Standard models ship in 15–30 days; customized units require 30–45 days.

Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.

Q: Can I request a customized bucket size?
A: Absolutely! We offer tailored attachments.

Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).

Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.

CI Flexo printing machine

Adopts FDS door system and sleeve technology for printing plate and anilox roller, which can realize fast job change. Meanwhile, it is equipped with auto splicing unwinder and rewinder, pre-register function, printing unit positioning technology, auto inking system etc. Maximum running speed 500m/min.

F2 Narrow Web Flexo Printing machine

The F2 series narrow web flexo printing features the different and unique printing platform as the other models in the lineup, delivering the fastest set-ups and changeovers and shorter web path, together with the fastest make-ready times in the industry (4-color changeovers are complete in just 3 minutes!). Additional advantages over traditional presses include short web paths and minimal ink usage requirements resulting in waste savings up to 50% and fast changeover times for increased productivity. The max speed can reach 180m/min.

F2 Medium Web Flexo Printing Machine

The F2 series medium web flexo printing features delivers the fastest set-ups and changeovers and shorter web path and fastest make-ready times in the industry. Additional advantages over traditional presses include short web paths, without adjusting pressure after changeover and minimal ink usage requirements resulting in waste savings up to 50% and fast changeover times for increased productivity. The max speed can reach 240m/min.

F3 series medium web flexo printing machine

The F3 series medium web flexo printing'maximum running speed is 240m/min. It adopts sleeve technology on plate cylinder with features like fast job change and low production cost. New designed mechanical structure can efficiently reduce machine vibration to realize high printing quality. Additional advantages over traditional presses include short web paths, without adjusting pressure after changeover, pre -register function and minimal ink usage requirements resulting in waste savings up to 50% and fast changeover times for increased productivity.

F4  1300-4 Full servo flexo printing machine

F5 1600-6 Servo Motor Driven Carton Pre-printing Press

This machine is designed for continuous printing of paper loaded in reels. The printing process is flexographic by liquid inks which is normally available on the market. 

widely used in light-weight coated paper, duplex board, coated paper, cardboard, non-woven fabric, Kraft paper, paper-plastic composite material, etc. It is widely used in packaging paper, paper box/bag, paper cup, courier bag, beer carton, food carton, etc. pre-printing fields.